Vol. 5 No. Tecnologia (2025): Multidisciplinary view of science

Technology

• Quality of electricity in transformer chamber II of the Technical University of Cotopaxi [Calidad de energía eléctrica en cámara de transformación II de la Universidad Técnica de Cotopaxi]

  Luis Armando Vargas-Tocte, Omar Luis Supe-Sailema , Carlos Francisco Pacheco-Mena, Jefferson Alberto Porras-Reyes

  1-15

  • PDF (Español (España))
  • HTML (Español (España))

  DOI: https://doi.org/10.62574/rmpi.v5i1.264

• Analysis of the technological and ethical challenges of telemedicine in the Republic of Ecuador [Análisis de los desafíos tecnológicos y éticos de la telemedicina en la República del Ecuador]

  Maryuri Damaris Tuz-Tapia, Jaime Arturo Moreno-Martínez

  16-22

  • PDF (Español (España))
  • HTML (Español (España))

  DOI: https://doi.org/10.62574/rmpi.v5iTecnologia.274

• Machine Learning and artificial intelligence algorithms in the detection of cyber-attack patterns [Algoritmos de Machine Learning e inteligencia artificial en la detección de patrones de ciberataques]

  Wendy Viviana Obregón-Martínez, Gabriel Eduardo Morejón-López, César Armando Moreira-Zambrano, Luis Nibaldo Oyarzún-Álava

  23-34

  • PDF (Español (España))
  • HTML (Español (España))

  DOI: https://doi.org/10.62574/rmpi.v5iTecnologia.276

• Internal structure and compression anisotropy of FDM-printed 3D elements using FEM [Estructura interna y anisotropía en compresión de elementos 3D impresos con FDM mediante FEM] Errata: An alert was received regarding possible plagiarism in the article entitled ‘Effects of anisotropy and infill pattern on compression properties of 3D printed CFRP: mechanical analysis and elasto-plastic finite element modelling’, by authors Francesco Bandinelli, Martina Scapin and Lorenzo Peroni. In order to avoid controversy, the authors of the article ‘Internal structure and anisotropy in compression of 3D elements printed with FDM using FEM’ made changes to the original document. The article was republished with modifications that eliminate the possibility of plagiarism. This clarification is made because the potentially plagiarised information did not affect the conclusions of the work, either in its original or modified version.

  Jorge Steban Ramírez-Jiménez, Luis Miguel Navarrete-López, Jefferson Alberto Porras-Reyes, José Ezequiel Naranjo-Robalino

  35-52

  • PDF (Español (España))
  • HTML (Español (España))

  DOI: https://doi.org/10.62574/rmpi.v5iTecnologia.290

• Operational safety risk management applied to maintenance [Gestión de riesgos de seguridad operacional aplicada al mantenimiento]

  Javier Iván Sandoval-Álvarez, Edison Patricio Salazar-Cueva

  53-68

  • PDF (Español (España))
  • HTML (Español (España))

  DOI: https://doi.org/10.62574/rmpi.v5iTecnologia.378